DT7520.20F: Call Point Illuminated Button, Single, Stainless

To improve customer experience and monitor performance, this website uses Folknoll Group and third‑party cookies. By continuing to use this website, you accept this practice.

Features

  • Vandal resistant alarm call button
  • Illuminated call button with activation delay
  • Button illumination indicates alarm state offering user reassurance
  • Activation delay to reduce false alarms, when used with a local reset or alarm controller
  • No PSU required, usually driven by a local reset or alarm controller
  • Tough, vandal resistant, brushed finish, stainless steel plate
  • Black silk screened annotation
  • Mounts in a standard UK, 35mm, single gang, back box
  • Anti‑tamper fixings available on request
  • Offers alternative or additional activation points to standard pull cords

Similar Products

Our Disabled Toilet Alarm Range

Our vandal resistant emergency assistance alarm range offers tough, cost‑effective, BS 8300‑2 and document M compatible systems suitable for public use. We supply stand‑alone alarms, multiple alarm systems with remote monitoring and combined systems with disabled refuge EVCS, building alarms, etc. For larger and smarter sites, we offer networked solutions with optional BMS interfaces. Ideal for hospitals, railway stations, hotels, airports and other public spaces.

Call Points

Call point buttons offer an alternative to standard pull cord alarm activation points. Mutiple pull cords and call points can be combined together on the same alarm system to cover a wider area and increase alarm accessibility. Call points can be also used in locations where pull cords may not be appropriate.

Call Point Illuminated Button, Single, Stainless

This unit is an alarm call point with a single illuminated call button. The button illumination mimics the operation of the overdoor beacon to provide visual alarm state indication for the user.

The main PCB has screw terminals for easy cable connection and the entire assembly mounts in a standard UK, 35mm, single gang back box. Anti‑tamper fixings are available on request.

The DT7520.20F Call Point Button offers a vandal resistant call point with an illuminated call button. To reduce the risk of accidental alarm activation the call button must be held for a minimum of 0.25 seconds before an alarm is activated. The button illumination mimics the action of the over‑door beacon giving the user a visual alarm state indication inside the alarm zone. The front panel is made from brushed finish stainless steel and annotated in black with the word CALL. Other finishes and alternative annotation are available on request.

This unit is designed for mounting in a standard UK, 35mm, single gang back box, and is compatible with all Folknoll emergency assistance alarm systems.

Specifications


Call point
Large, push button with red illumination
Voltage
12Vdc and 24Vdc versions available, please specify when ordering
Front plate
Stainless steel (304/1.4301), 1.5mm, brushed finish
Annotation
Black silk screened
Plate dimensions
Width: 86mm, height: 86mm, depth: < 35mm (approx.)
Plate mounting
Standard UK, 35mm, single gang, back box (not supplied)

Suitable for

Downloads

Other Disabled Toilet Alarm Products -+

A complete list of Folknoll products in this range.

Care Product Ranges -+

Nursing homes, retirement homes, assisted living residences, etc.

Buildings Product Ranges -+

Factories, offices, hotels, stations, offices, schools and other public buildings.

Custodial Product Ranges -+

Police stations, prisons, courts, secure hospitals, border agencies, etc.

Share this Page -+

Add to social media.